Plate Bending Machine for curtain wall machine

Plate Bending Machine for curtain wall machine. 1.used for the roll bending processing of aluminum composite panel, alu. sheet

Plate Bending Machine for curtain wall machine.

The machine is mainly used for the roll bending processing of aluminum composite panel, pure aluminum plate, stainless steel board and steel bar. The NC machine thoroughly solves the problems of only driving the upper roller, and the difficulty of rolling thinner stave and can realize greater declivity of the upper roller and side roller through the change of roller and then roll conical barrel with huger coning; it is with clear operation interface and simple and convenient but precise operation. Therefore, it is one kind of product which can make you obtain high production efficiency, reliability and competitiveness.    Three-roller numerical controlled machine is the most innovative machine in the market at present, and it is especially suitable for the heavy loading work of rolling thickness bar. Very thick plate can be rolled only by increasing the distance between the lower side rollers. The fact has proved that straightway shorter than any others produced by any three-roller rolling machine can be obtained through numerical control software produced by our company in pre-bending of flexible shaft. It possesses many advantages compared with other similar three-roller rolling machines.       Four-roller hydraulic numerical controlled rolling machine has the function of double-end pre-bending. It is the machine with the best performance in the international market; it has advantages not possessed by any other machine; the operator only needs determining the position of the side roller, and it will begin to make the fore-end pre-bending of bar material automatically with shortest straightway left; unlike single-side pre-bending rolling machine which needs the working procedures of sheet material moving out, U-turn, and re-feeding, etc, the four-roller hydraulic numerical controlled rolling machine can finish all the procedures only by passing once.      TECHNICAL PARAMETER

Model and parameter	KS-WB2505/3005 (KS-WB102/WB103)   Three Rolls Plate Bending Machine
Maximum thickness of bending	6mm
Maximum width of bending	2500mm/3000mm
bending speed	7.16m/min
Working mode	Manual adjustment
Working voltage	380VAC/50HZ
Driving mode	Motor drive the gearbox move
Power of main motor	3.5Kw
Overall Dimension (L*W*H)	4300x1200x1330mm
Weight of machine	1200Kg
Matching device	Equipped with feed table, loading station and feeding device, it can become an automatic roll bending centre with high efficiency

Plate Bending Machine for curtain wall machine